Our Products Range
29 items
-
2 Core Sheathed Flat Cables
Two PVC insulated cores laid up together and PVC sheathed overall. Application for light duty purpose for both indoors and outdoors such as portable tools and domestic appliances.
-
2 Pin Cord
A double Insulated plug attached to a specified length of 2 core wire forming an integral part of the lead. the inner is moulded with PP or nylon and is jacketed with insulation grade PVC Application in appliances where ground of earthing is not required
-
3 Core Sheathed Round Cables
Three PVC insulated cores laid up together and PVC sheathed overall. Application for domestic appliances wiring and power supply for Office automation
-
Battery Wires
Multi Stranded electrolytic grade copper bunched and laid so as to give maximum wire flexibility insulated with heat resistant PVC upto 105°C. Application in automobile and inverter industry for battery power supplies
-
Cat-6 LAN Cables
A new Generation High Performance cable used in computer networking manufactured as per TIA/EIA 568A. The Conductor, made of electrolytic grade polyethylene. Rach pair is individually twisted and laid ensuring absolutely consistent distance maintained over the entire length of cable. the cable insulates with special grade retardant PVC. Application in networking requirement such as:
- 10 Base TX
- 100 Base TX
- 100 Base VG Anylan
- 155 ATM
- IEEE 802.3
- IEEE 802.5
- 16 Mbps Token Ring
- 622 ATM
- Gigabit Ethernet
-
Close Circuit TV (CCTV) Wires
The Cable Consists of a single coaxial cable and number of flexible unscreened conductors wrapped in a PVC outer sheath. This cable is ideal for use in applications. it combines the advantages of coaxial screening with reduction in installation cost running a multi core cable
-
Coaxial Cable
A cable is used for a superior quality transmission the inner conductor id made of annealed electrolytic grade copper and is insulates with high quality dielectric Foam (Gas Expanded), Closed cell Polyethylene Insulation for low transmission losses. The core is double screened with high braid coverage and a bonded AIPPAI baked tape, This ensures no space of moisture into the cable low attenuation thus providing better and clear picture. These cables provide high bandwidth and enable reception of more channels than other cables, reducing the no. of amplifiers and installation cost
Send Query -
DC Charger Wires
2 Core Multi strand electrolytic grade copper conductors insulates and sheathed with non migrant PVC so as to not to damage charger cabinets upon contact application in low voltage power supplies for electronics
-
Flexible Wires
Multiple stranded conductor, tinned copper, PVC Insulated used for transmission of low voltage signals while permanently connecting fixed parts of such as panel board to any apparatus or mobile unit
-
Hearing Aid Wires
Tinsel Copper Conductor for low noise and high transmission insulated with medical grade special PVC Compound non Allergic to skin ad non effective by sweat laid in a twisted formation used with hearing and machines.
-
Hook Up Wires
Solid, Tinned and annealed copper conductor insulated with PVC compound, intended for internal use in electrical or electronic equipment such as control panels and switch gears etc.
-
Microphone Cables
Electrolytic high conductivity copper conductors cores lid up with cotton filler and shielded with double spiral copper shield with up to 95%coverage, Mylar taped and overall sheathed with a special type of elastomeric compound for extra ruggedness, flexibility and log life.
Application for use in connecting low level microphones or musical instruments b utilizing 2,3, or 4(quad) design depending upon various applications
Quad Connection Scheme : To Lower the possibility of induced noise and interference , the Two Blue Wires (or wires opposite to each other) are connected together to form one conductor and similarly the two white wires ( or remaining two opposite wires ) are connected together form the second conductor
-
Multi Core Cable Shielded(Aluminium Foil)
Cables having tinned copper wire conductors shielded overall with ALUMINIUM-POLYESTER FOIL WRAP and having a stranded drain wire. A range of cables meant for broadcasting data or instrumentation use.
-
Multi Core Cable Shielded(Screened/Braided)
Multi-Colored cores of fine copper wires, twisted into layers banded with polyester foil and finally insulated with PVC, Application as connection cable for signal transmission, measuring and control devices intercommunication and data transmission at working temperature of -5 Degree C. to +80 Degree C
-
Multi Core Cable Unshielded
Multi colored cores of fine copper wires twisted into layers banded with polyester foil, and finally insulated with PVC. Application as connection cable for signal transmission, measuring and control devices intercommunication and data transmission at working temperature of -5°C to +80° C
-
Multi Pair Snake Cables
Pairs of standard tinned copper wire conductor, PVC insulated individually Twisted and laid up shielded or unshielded and finally PVC sheathed . Primary used for connecting multiple channels such as console board equipment for recording studios, Radio and Television stations, calling systems in hospitals or hotels and also for instrumentation applications . The Shielding configuration can be overall or individual pair screened
-
Multi-core Round Cables Upto 1100V
Annealed and bunched together bright electrolytic grade copper insulated with specially formulated PVC with high insulation resistance values. Cores color coded and laid up and sheathed with special PVC to facilitate ease in stripping and mechanical abrasion. Application in machine tools, appliances, control panels and industry of every nature
-
Nutek 3 Pin Cord NE-3P-02
A 3 Pin double jacked plug moulded to a 3 core wire forming and integral part of the lead. The inner is moulded with PP or Nylon to give the plug its mechanical strength and is further insulated with PVC for its electrical properties. Application in almost all appliances consuming electricity.
